|Posted by Katie on May 3, 2013 at 1:50 PM||comments (580)|
Senate Bill 90 has been signed into law. This bill will put 0.5 percent of cash from the motor fuel tax into the Waterway Improvement Fund - which funds dredging, as well as other projects for the state's waterways.
Senate Bill 90 also establishes a $15,000.00 vessel excise tax cap. Maryland's vessel excise tax requires boat owners to pay 5 percent of the value of their boat if they purchase it in the state of Maryland, or of they intend to keep the vessel in the State longer than 90 days per year. The bill directly affects the tax paid by owners of boats worth $300,000.00 or more.
For the marine industry, this bill will create an incentive for boat owners to purchase and register their boats in Maryland. For every six boats that are registered, a full-time job is created. Ultimately, the expectation is that SB90 will attract larger and more expensive boats to Maryland, which in turn will lead to more opportunities for marinas. A boater typically spends 10% of the vessel's value annually for maintenance, storage and use.
To learn more about Senate Bill 90 and how it may affect you, please visit http://www.mtam.org/.
|Posted by Katie on March 8, 2013 at 2:30 PM||comments (0)|
The following information and links come via the Marine Trades Association of Maryland. For more information, please visit their site: http://www.mtam.org/
NEW ACTION ALERT!
If you haven't already done so, now is the time to send an email to members of the Maryland General Assembly urging them to pass legislation that will help make Maryland's boating industry more competitive with our neighbors up and down the Atlantic Coast. The hearings are done but the committees have not yet brought these bills to a vote. Please understand that the more they hear on this issue - the better chance we have of getting them to vote in favor of these bills.
The emails and phone calls that have been received thus far are making a difference! During the House and Senate hearings on House Bill 548 and Senate Bill 90, members of both committees showed they are paying attention to our concerns and asked smart, supportive questions of our representatives during their testimony. Many committee members also expressed healthy skepticism of the opposition from the Department of Natural Resources - essentially asking DNR officials to do more than just oppose our ideas but give their own solution for how they would improve Maryland's marine trades industry.
ONE MORE EMAIL OR PHONE CALL DOES MAKE A DIFFERENCE!
DNR officials are realizing that there is growing support among members of the Senate and House to approve a reasonable limit to Maryland's boat excise tax, to help restore a competitive balance between Maryland and such states as Delaware, Florida, Rhode Island and Virginia. So DNR officials have switched to a technique frequently used by state agencies seeking to derail legislation they oppose in the face of widespread public and legislative support - they're pushing for the issue to be sent off to "summer study."
Let's see if we get this straight. DNR just spent $84,000 on a study (a study fairly similar to one the Marine Trades Association of Maryland had gotten a $7,500 quote to conduct back in December 2011). Now they want to spend more taxpayer dollars on more study and delay. In the meantime, our boating industry continues to suffer. As boating sales and boating registrations are picking up again nationally, the numbers just aren't bouncing back here in Maryland.
We've had enough study and delay. We need to try something. Maryland has been talking about a boat excise tax cap since 2002, and while we've done nothing, other states have taken a competitive advance. Florida passed a tax cap in 2010, and its boating registration numbers have soared.
We've had enough study. We've had enough delay. If we pass a reasonable cap with a four-year sunset provision, that will give our industry enough time to show the state that we can, in fact, boost our boat registration numbers enough to help our industry and replenish the revenues to the Waterway Improvement Fund.
|Posted by Katie on January 23, 2013 at 5:10 PM||comments (0)|
• Probably the most important thing you can do for your boat is to clean the bilge. Besides making leaks difficult to find, a dirty bilge is a major source of bad odors on the boat. Also, if the bilge is contaminated with fuel or oil, for example, you should clean it to prevent the bilge pumps from pumping the contaminants over-board.
• Check to see that all bilges drain to areas with bilge pumps. Often these drains become clogged preventing water form reaching the bilge pumps where it can be removed from the boat. Bilges under the engine are not supposed to be connected to areas with bilge pumps. These are to remain isolated.
• Check all bilge pumps. Make sure that they come on in both manual and automatic mode. Lift float switches and make sure that the pumps run. Remove any debris that can clog the bilge pump so that they work when needed.
• Make sure that you can identify all sea cocks and thru-hull valves. In an emergency you need to know where they all are and what they do.
• Inspect all sea cocks and thru-hull valves. Make sure that none are leaking. Check for signs of leaks around the base of sea cocks and thru-hulls. If you suspect that they are leaking, have the boat hauled out, and have them removed, cleaned, and re-bed. Ensure that all valves open and close easily, and that when closed, they actually close and do not leak water past the ball. If they do not open and close easily, or if they do not stop the water, they need to replaced or serviced. Some can be serviced- they can be taken apart, cleaned, greased, and reassembled. Others are not serviceable and just need to be replaced. Most likely the boat will need to be hauled out to make any repairs.
• Inspect the bonding system. Everything metal on the boat should be bonded- all thru-hulls and sea cocks, struts (using the bolts that secure them to the boat,) strainers, engines, generators, fuel tanks, etc. The bonding system should be connected to the dc battery ground at one point. This is not only a safety issue, but it also allows the sacrificial anodes (zincs) to protect these components as well. Make sure that all bonding wires are not broken, and that the connections are made tight and that they are clean.
• Inspect all transducers. Make sure they are not leaking between the base and the hull. If there are signs of leaks, the transducers need to be removed, cleaned, and re-bed. Some transducers have a speed wheel. These can be removed while the boat is in the water if there is a plug to replace it while you are cleaning it. Just pull out the center piece, clean the speed wheel, and reinstall it.
• Check the dates on all fire extinguishers, Now is a good time to send them out and have them re certified since the boat is going to be laid up for a few more months.
• Check all deck drains to ensure that they are functioning and that they are not clogged. This is important as they drain off water from rain and snow. Boats have sunk because deck drains were either clogged or left closed after winterizing the boat. Take the time to check each one by pouring water through the drain. If the water does not drain, find out why and repair it.
• Check all smoke/CO detectors. As in your house, pick a time every year to replace the batteries in all the detectors. Also, most have a test function on them. Make sure they are all in good working order and replace those that are faulty.
• Check the engine room ventilation system. Check to see that the vents on the outside of the boat are open and that the fins on the louvers are intact and not bent or broken. Make sure that the blower fans come on and see that the hoses are in place and secure. Also check the hoses for cracks, tears, and make sure they are not crushed. Duct hoses tear easily and are often found hanging next to blowers when they should be attached.
Hulls- if the boat is going to be on land
• Use this time to take care of the bottom of the boat. Spend time cleaning the hull and then give her a new coat of bottom paint. A clean bottom improves performance and also dramatically reduces fuel costs.
• Clean and inspect the running gear. Pay extra attention to these components if there is a vibration while running or if you hit anything while running in the previous season. Make sure that the nut securing the prop is tight and that the cotter pin is still in place.
• Inspect the boat zincs and replace them as needed. Note any unusual deterioration of the zincs, like if they are completely gone or look brand new but have been on the boat for an entire season. Hire a technician to inspect them for you if you think there may be a problem.
• Have the bottom of the boat inspected for blisters and other signs of water intrusion. Ask a boat yard to discuss with you the extent of the moisture damage and what to do to either fix it or prevent it in the future.
• Hire a surveyor or boat yard to check moisture readings in the hull and decks. Make sure they check around the bolts securing cleats and swim platforms, and around all deck fittings like fuel and water fills. Discuss what can be done to repair the problems or prevent problems from occurring in the future.
• Check all o-rings on fuel tank fill caps. They need to be replaced if there are any cracks in the o-rings, or if they are hard and brittle. Failure to maintain these o-rings will allow rain water to leak into the fuel tank creating many problems that are costly to repair. Water in fuel accounts for many engine and generator problems which are expensive to repair and cause increased down time during the boating season.
Once you have completed a thorough inspection of the entire boat you will be so much more familiar with your boat. You will have plenty of time to make any repairs needed before the coming season. You will be confident that she is ready to give you a trouble-free boating season. And while freak problems may occur, you will not be plagued by nuisance failures caused by poorly maintained equipment. Also, when these freak problems happen and repairs are necessary, repair costs will be minimized if you took the time to clean away rust and corrosion.
So grab a space heater, put on some good music, and inspect your boat from top to bottom. The more time you spend with her now, the more trouble free time you will get to spend enjoying her this coming boating season.
|Posted by Katie on January 7, 2013 at 1:55 PM||comments (1)|
It is sad to say that the boating season is almost over. With the exception of those still fishing, most of you are in the process of laying your boat up for the winter. For the next 4 months or so, your boat is out of commission. That does not mean, however, that you have to abandon it. This is the perfect opportunity to invest time in your boat, cleaning, catching up on required maintenance, and performing a thorough inspection of the entire boat and every piece of equipment on board. There are real benefits to taking a critical eye to your boat once a year. Potential problems can be addressed, increasing the longevity of the boat, improving its performance and fuel economy, and also preventing failures from occurring when you want to use the boat. Your boat will be safer, more reliable, and ultimately more enjoyable in the coming season.
I have found that most boat owners are very good at maintaining their boat. They follow the guidelines in their engine and generator owners manuals, and they often ask their technicians to look over everything and recommend things that need attention. This is good, but only things that are noticed get fixed. Other than that, repairs are made when problems arise, leaving the boat down, unable to be used, or worse, leaving the owners stranded if a failure occurs while it is in use. A comprehensive annual inspection is the best way to avoid problems from occurring in the coming season. Besides the obvious benefits of finding problems before they become failures, it gives you as the owner a chance to really familiarize yourself with your boat and all of it's systems.
Engines and Generators
• Take a look at your maintenance schedule and maintenance logs. Are there maintenance items due that have been overlooked? Pay attention to those things that will be due soon. Take care of those things that will leave your boat out of commission for longer periods of time, like cleaning the cooling system components and servicing after coolers, or replacing risers and exhaust manifolds.
• Take the time to clean rust and corrosion. Not only will this prevent premature failures, but it will save you money when repairs are needed. Rusted bolts break, corroded components are difficult to remove, adding many hours in labor to even the simplest of jobs.
• Inspect all hoses and hose clamps. Look not only for cracks in hoses but also for those that are hard and brittle. Try to tighten all hose clamps and replace those that show sign of rust and corrosion.
• Inspect stuffing boxes and the associated hoses and clamps. Remember that these in particular tend to sit in water, and when they fail they can put your boat at risk of sinking.
• Check for leaks. While you cannot run your engine or generator if they are winterized, you can look for signs of leaks. Leaks often times leave tattle trails, or trails running down the engine. If the bilge under the engine is dirty, clean it. It is very difficult to notice a leak that is dripping into a dirty bilge. Drips are easy to spot if the area under the engine is clean and free of water, oil, coolant, etc. White oil sorbs placed under the engine can make spotting drips early on even easier.
• Inspect all electrical connections. Pay attention to ground cables in particular. Corroded connections cause voltage drop, putting increased strain on all electrical components.
• Check all hoses and hose clamps. Make sure that they are not hard or brittle and that there are no cracks. See that all hose clamps are clean and tight.
• Look for standing water in the drip pans. If the unit is holding water, find out why. Make sure that condensate drains are free from clogs, and that they are draining to a sump box or to an area of the bilge that is accessible to a bilge pump. Remember that there may be condensate drains on both the condensing unit and the air handler on split systems.
• Clean the air filter. Many systems have two filters- one behind the return grill, and another on the evaporator itself. Poor air flow reduces the performance of the air conditioner dramatically. Make sure that there is a clear path for air to move from the return grill to the air handler. Do not store belongings in such a way as to prevent air from flowing to the blower.
Heads and Holding Tanks
• Check the operation of all the pumps associated with the heads. Most have a water pump and a macerator that both must operate to deliver waste to the holding tank. Inspect all of the hoses, both sea water and black water hoses. Sea water hoses run from a thru-hull to a strainer, then from the strainer to a pump, then from the pump to the head. Black water hoses run from the head to the holding tank, possibly with y-valves in the middle. Replace any that show signs of age or damage. As the black water hoses age, or if poor quality hoses are used, gasses are able to permeate the hoses, leaving an odor in the boat. If that is the case in your boat, think about replacing all of the waste hoses throughout the boat.
• Inspect all y-valves. Make sure they open and close easily. Leave them in position to direct waste to the holding tank, not to an overboard discharge if your boat is so equipped, and secure them in that position either with a pad lock or a wire tie. Make sure the thru-hulls for any overboard discharge is closed when ever it is not being used.
• Replace the filters on the holding tank ventilation system. Some tanks just have a vent hose that runs from the tank to a thru-hull while others have an inline filter in this hose. If your tank does not have a filter and there is an odor outside the boat every time you flush, consider adding an inline vent filter.
All Water Systems
• Inspect all water pumps for signs of leaks and repair them as needed.
• Check all electrical connections to ensure they are tight and free of corrosion.
• Inspect all water lines or hoses for cracks and leaks, and make sure all hose clamps are tight.
• Check the water heater. Never turn it on while empty as the heating element will burn up. Many water heaters rust internally or collect debris from the rest of the system, leaving the hot water full of contaminants.
• Remove the screens from all the sinks and clean them, as they are often full of debris. By removing and cleaning them periodically you will maintain good water flow throughout the system.
• Check all sink, shower, and wash down valves. Replace those that are hard to open, will not shut all the way, or leak water past the valve when closed.
Electrical Systems, both AC and DC
• Inspect all batteries. Check the water level and add distilled water as needed. Check all connections on the batteries. If they are dirty, remove all the cables and clean the terminals and the cable ends. Make sure they are all tight, and make sure that at the very least the positive terminal is covered.
• All battery grounds should be tied together. Make sure that they all are- don't forget engine starting batteries, generator batteries, house batteries, and any dedicated batteries like those for a windlass or thruster motors.
• Inspect all connections at all battery switches, buss bars, and circuit breakers. Make sure that you disconnect shore power from the boat before inspecting any AC breakers and buss bars. Check to see that all connections are clean and tight and that none of the wires look like they have been burnt.
• Check battery charger connections also. Make sure that the charger is working. If it is a 3 stage charger, make sure that it goes though all of the 3 stages. Look for any signs of excessive heat.
Check out Part II, to be published on January 22, 2013!
|Posted by Katie on December 21, 2012 at 1:05 PM||comments (0)|
As we cruise into another year, all of us at Southern Maryland Boat Works would like to wish you a very Merry Christmas and a fantastic New Year.
|Posted by Katie on November 12, 2012 at 1:10 PM||comments (4)|
By: Katie Finnecy
It is that time of year again, the days are shorter and the cold of winter is setting in. Now is the time to think about winterizing your boat. We all know why winterizing is important: water expands as it freezes, leading to the risk of bursting pipes, hoses, and any component that holds water, both fresh water and sea water.
There are many systems that your boat may have that contain water depending on the size of your boat. These include engines and generators, potable water systems, washdowns, heads, holding tanks, mascerators, overboard discharges, air conditioners, water makers; I could go on and on. It is not enough to just drain the water from each system as there are many low lying components and runs of pipes will not drain on their own. There are also important things to consider when winterizing each system, whether you do it yourself or hire a mechanic to lay up the boat.
Engines and Generators
• Treat the generator the same as a propulsion engine at winterization. The generator engine requires everything that the propulsion engine does, though it is often overlooked and neglected.
• Always change the oil when laying up an engine or generator. Contaminants in used engine oil combine with moisture from condensation to form acids that attack internal engine parts.
• Always check the concentration of engine coolant to determine at what temperature the coolant will freeze. If the freeze point is not low enough, engine components could freeze and crack, such as heat exchangers, cylinder heads, and even cylinder blocks.
• Use enough winterizing antifreeze to displace all of the water in the engine. The amount of antifreeze you need to use depends on the size of the engine and the design of the exhaust system, for example the type and size of muffler and length of hose runs. There is no general number of gallons needed.
• Always fill fuel tanks. A full tank will minimize the amount of condensation, which translates to less water in the fuel.
• Use a good fuel stabilizer at every fill up to protect the fuel when being stored for any length of time. It should resist microbial growth, improve lubrication (diesel engines,) and boost either octane or cetane depending on the fuel you burn.
Potable Water Systems
• Identify all the features of your potable water system. Some systems are very simple with few parts; others are very complicated with a lot of components. Typical water systems could contain water tanks, sinks, showers, shower sumps, heads, potable water wash-downs, water heaters, ice makers, windshield washers, and water makers.
• Drain the water heater. Some have drain valves, others do not. If there is no drain, remove the inlet water line and check valve to drain.
• Bypass the water heater. It will dramatically reduce the amount of winterizing antifreeze needed to fill the system.
• Some marine heads use potable water to flush. Others use sea water. Those that use potable water depend on the system pressure to fill the bowl. Heads that use sea water have their own pumps.
• Once the water side of the marine head is winterized, address the rest of the sanitation system. Other items to consider are holding tanks, y-valves, overboard discharges, and macerators. Any of these can hold water and risk bursting.
• Always, always, always empty holding tanks prior to your winterization. Remember to do it before winterizing the engines as you mayhave to take your boat to an authorized pump out station.
• Air conditioners use sea water in the condensors. They have their own pumps and water lines that have to be winterized.
• Several units may be fed from one water pump. Take care to ensure that winterizing antifreeze makes it to each of the air conditioners.
• It is also a good time to inspect the condensate drains at both the condensors and the evapoators. If there is more than a little standing water address the drainage issues.
• If the boat is to stay in the water all winter do not close scupper drains. These are needed to drain rain and snow water from the boat. Make sure they are functioning and clear any clogs.
• Turn off all battery switches to prevent battery discharging over the winter.
• If the boat is being stored on land, open all thru-hulls/sea cocks apon completing winterization to drain any water held in the valve.